Durch die Nutzung von AWS re:Post stimmt du den AWS re:Post Nutzungsbedingungen
AWS re:Postre:Post

Amplify custom domain stuck on SSL configuration

0

When trying to setup a custom domain on AWS amplify, i cant get past the SSL Configuration step. Process just freezes there.

I have verified and reverified the CNAME record is entered correctly and can be found using https://www.whatsmydns.net/.

I have tried deleting and re-entering the custom domain.

We place the CNAME record immediately so i dont believe we are running into an issue of AWS verification not being able to find it in the first 60 minutes.

Any ideas on what could be wrong?

  • Johnny Shollaj
    vor 9 Monaten

    The issue lays with mismatch between NS Records. You can follow these steps:

    • Go to the Route53 Console in your AWS account.
    • Look for the hosted zone that corresponds to your domain. You might find it under 'Hosted zones'.
    • Once you're in the hosted zone, you will find a record set with a type of NS. This NS record will have 4 values. Those are the nameservers that you should use for your domain.
    • Go to the 'Registered domains' section, select your domain and click on 'Add or edit nameservers'.
    • Replace the existing nameservers with the ones you found in the hosted zone. Wait for a while for the DNS propagation - but not too long. Usually takes at most 2 hours!
Themen
Frontend-Web & Mobile
Tags
AWS Amplify
Sprache
English
bmyrtil
gefragt vor 4 Jahren3864 Aufrufe
7 Antworten
1

I was having this same issue, and it turned out that my NS records listed under "Hosted zones" didn't match those under "Registered domains." All this is on the Route 53 dashboard. So I updated the ones under "Registered domains" and now everything is working.

markhaines
beantwortet vor 3 Jahren
0

I'm having this same issue I believe (just posted about it on here).

Did you ever figure out a solution?

garp
beantwortet vor 4 Jahren
0

I'm having the same issue. I've double checked everything is correct on my domain records, and it's been stuck in the SSL configuration stage for over 24 hours. Any ideas on what to try differently?

parkhj
beantwortet vor 4 Jahren
0

Experiencing this too...It's been more than 48 hours. I tried removing app, redeploying and then adding my custom domain again. CNAME is propagating so not sure what to do at this point...it's been a while.

s0uth
beantwortet vor 4 Jahren
0

I don't have nothing under Registered domains nor in the Hosted zones, because I have never done any configuration there. It's not required for Amplify to work. I keep having the same problem. Has anyone solved it? Thank you.

Edited by: MartinAristizabal on Dec 15, 2020 6:19 PM

MartinAristizabal
beantwortet vor 3 Jahren
0

I solved it!. The thing is that there is a specific configuration for Godaddy in my case, that differ from the ones by default in the instructions. I followed the "Troubleshooting guide" in the Custom Domain configuration and now my domain is working OK. Other cases could be similar to these.

MartinAristizabal
beantwortet vor 3 Jahren
0

I also stuck to the same problem. In my case for NameCheap what needs to be done instead of "Configure a CNAME to point to the AWS validation server" as in trouble shoot was to specify nameservers in my AWS account(Route 53) in NameCheap configuration. after the configuration is done, as fast as within 10mins, the domain is activated in Amplify console.
DNS config is always a pain in the ass as it's always stated that "it might take up to 24 hours" or so on.
Hope this might help someone who ends up here!

https://www.namecheap.com/support/knowledgebase/article.aspx/10371/2208/how-do-i-link-my-domain-to-amazon-web-services/

Edited by: RouterKiez on Sep 7, 2021 11:01 AM

RouterKiez
beantwortet vor 3 Jahren

Du bist nicht angemeldet. Anmelden um eine Antwort zu veröffentlichen.

Eine gute Antwort beantwortet die Frage klar, gibt konstruktives Feedback und fördert die berufliche Weiterentwicklung des Fragenstellers.

Richtlinien für die Beantwortung von Fragen

Relevanter Inhalt