Instances Launched from modified RHEL 9 AMIs Created from Red Hat Enterprise Linux 9 (HVM) are unreachable

0

Steps:

  1. Launch instance from Red Hat Enterprise Linux 9 (HVM), SSD Volume Type ami-026ebd4cfe2c043b2 (64-bit (x86)) / ami-03d6a5256a46c9feb (64-bit (Arm))
  2. Modify instance, add volumes, lvm2, mlocate, libnsl, selinux permissive, ulimits, etc.
  3. Create AMI from your modified instance
  4. Launch new instance from the AMI, it will never be reachable.
  5. Do this as often as you like, results are infinitely repeatable.
gefragt vor einem Jahr899 Aufrufe
1 Antwort
0
Akzeptierte Antwort

Your problem seems to be a networking or configuration issue that occurs when you're creating a new Amazon Machine Image (AMI) from your modified Red Hat Enterprise Linux 9 (RHEL 9) instance. There are several reasons this could be happening, and I will discuss some potential causes and solutions.

  1. Networking or Security Group Configuration: Ensure that your instances are being launched in a subnet with a route to an Internet Gateway if you are trying to connect over the internet. Also, verify that the security group rules for your instance allow inbound traffic from your IP address.

  2. SSH Key Pair: Ensure you are using the correct SSH key pair that matches the one specified at the time of instance launch. If you lose the key pair, you can't connect to your instance.

  3. Selinux Configuration: You mentioned setting Selinux to permissive mode. If it's not done correctly, it might cause issues with SSH or other services on your system. You can check its status using sestatus.

  4. Firewall Settings: The firewall on your RHEL instance might be blocking incoming connections. You can temporarily disable it to see if this is causing the problem, using systemctl stop firewalld, and if this is the problem, you'll need to configure it to allow the connections you need.

  5. Service Status: Ensure that the SSHD service is running on your instance using the command systemctl status sshd.

  6. System Logs: If your instance is unreachable, you can use the EC2 Serial Console (if enabled) to troubleshoot boot issues, or review system logs.

  7. Instance Launch Configuration: When creating a new AMI, the block device mapping for the new AMI is by default the same as the original instance. This means all volumes are marked as delete on termination. If you've added EBS volumes and they're critical for the system to function, make sure to set them not to delete on termination.

  8. LVM Configuration: Ensure that the Logical Volume Manager (LVM) configuration you made doesn't interfere with the boot process. For instance, if you've added a logical volume that's needed for boot but it's not available, this could prevent the system from coming up.

To solve this issue, you might need to conduct some tests to pinpoint the problem. Try to create a new AMI without making all modifications at once, instead add one modification at a time to identify which is causing the problem.

profile picture
EXPERTE
beantwortet vor einem Jahr
profile picture
EXPERTE
überprüft vor 7 Monaten
  • Here's the problem, is there any way around this?

    [root@i-0a43cb45ffd8f64b9 ~]# pvdisplay Devices file sys_wwid nvme.1d0f-766f6c3030343039366661633532333465326236-416d617a6f6e20456c617374696320426c6f636b2053746f7265-00000001 PVID FSbqmMeK99fDoCldh2yxIsE1pdHqjSFf last seen on /dev/nvme1n1 not found. Devices file sys_wwid nvme.1d0f-766f6c3037613464623333656535303861616565-416d617a6f6e20456c617374696320426c6f636b2053746f7265-00000001 PVID 6REH33dfyI99OYe8J7FSeHV2er4SzSnU last seen on /dev/nvme3n1 not found. Devices file sys_wwid nvme.1d0f-766f6c3063626563366139303136643730313863-416d617a6f6e20456c617374696320426c6f636b2053746f7265-00000001 PVID S0YAIsXTRyW582344RGUVy1u6etURaUt last seen on /dev/nvme4n1 not found. Devices file sys_wwid nvme.1d0f-766f6c3066373562303334386563666436396334-416d617a6f6e20456c617374696320426c6f636b2053746f7265-00000001 PVID 8Who2LxgPnShtHm4ISNgFfTv8so1SfGE last seen on /dev/nvme5n1 not found. Devices file sys_wwid nvme.1d0f-766f6c3035643430646631643131343964306465-416d617a6f6e20456c617374696320426c6f636b2053746f7265-00000001 PVID pKR8aGnQDkvH2TalCIR4WStFHwhqpX3N last seen on /dev/nvme2n1 not found. Devices file sys_wwid nvme.1d0f-766f6c3038623139633532346636613837323461-416d617a6f6e20456c617374696320426c6f636b2053746f7265-00000001 PVID edK6cGIaQTQnw6eKpbDFreuK583CHUfj last seen on /dev/nvme6n1 not found. [root@i-0a43cb45ffd8f64b9 ~]#

Du bist nicht angemeldet. Anmelden um eine Antwort zu veröffentlichen.

Eine gute Antwort beantwortet die Frage klar, gibt konstruktives Feedback und fördert die berufliche Weiterentwicklung des Fragenstellers.

Richtlinien für die Beantwortung von Fragen