Error on Lumberyard 1.25

0

Hello everyone! I have several problems with the installation of Lumberyard 1.25. In several versions of windows and in different equipment and the same problem was repeated. Has anyone experienced these problems? Thank you all! REMOVEDUPLOAD

asked 4 years ago154 views
26 Answers
0

Hi @REDACTEDUSER

It appears as though the Asset Processor is unable to launch due to a Gem that has not been compiled (looks like it's the Image Processing Gem). Would you mind answering a few questions about your setup that might help me understand more about the issue?

Have you changed projects or enabled new gems using the Project Configurator? If so, have you rebuilt the selected/modified project?

It appears as though you are launching the Visual Studio 2019 version of the Lumberyard Editor and Lumberyard Asset Processor, do you have Visual Studio 2019 installed on your machine? Have you run the Setup Assistant to select which version of Visual Studio you would like to build for? (if you are looking for the 2017 version of the Editor, you can find it in the "dev/Bin64vc141/" folder. "142" is used for 2019)

answered 4 years ago
0

Thanks @REDACTEDUSER Answering your questions, on two Windows 10 devices, both did not have Lumberyard installed. I downloaded VS studio 2019 and later tried 2017 with a new engine installation and it didn't work. I removed everything, installed everything again and when starting the engine it gives the same message! Do you have any suggestions on what to do? I did the installation in standard mode, defaltu as I always do. Unfortunately it didn't work!

answered 4 years ago
0

Hi @REDACTEDUSER Thanks! Unfortunately it didn't work!

answered 4 years ago
0

Hi @REDACTEDUSER

LY Editor does not open when I use VPN & Turn On MY VPN, this is not a bug & you know what is VPN Program , VPN is to break censorship in countries like Iran , Russia , China.

REMOVEDUPLOAD REMOVEDUPLOAD REMOVEDUPLOAD

answered 4 years ago
0

Hi @REDACTEDUSER

Based on the error message in the photo you have attached, it looks as though there is already one instance of the Asset Processor running on your machine. The Asset Processor can only have one instance running at a time.

Can you check in Windows Task Manager to see if you have any instances of the Asset Processor running already? And if so, can you kill the active Asset Processor, enable your VPN, and attempt to launch the Asset Processor again?

answered 4 years ago
0

@REDACTEDUSER

  1. when you say that you "did the installation in standard mode", are you referring to the options presented to you when you launch the Setup Assistant?
  2. After downloading Lumberyard, what actions did you take? More details about what tools you ran and how you launched the Lumberyard Editor will help me figure out what issue you are experiencing

Here is a link to our documentation around the Setup Assistant, it may help you: https://docs.aws.amazon.com/lumberyard/latest/userguide/lumberyard-launcher-using.html

In general, when setting up Lumberyard for the first time, the process should include:

  1. Running the installer
  2. Running the Setup Assistant (There will be 2 options here, one for a quick install, the other for a custom install)

If you chose the quick install, the Editor should be functional.

If you chose the custom install, you will need to run the Project Configurator and build your selected project for any of the custom installation changes to be applied (this includes Visual Studio version, whether or not to build the tools and engine along with the game, and 3rd Party settings).

answered 4 years ago
0

Thanks for listening @REDACTEDUSER Yes I did the standard installation, and there was nothing wrong. When running the engine there is the error I sent. I've always installed it this way and at 1.25 came giving these problems. All installed in standard mode, and following the official documentation.

answered 4 years ago
0

@REDACTEDUSER

REMOVEDUPLOAD

answered 4 years ago
0

@REDACTEDUSER

  1. Clicked "Download Now" on https://aws.amazon.com/lumberyard/downloads/
  2. Launched the LumberyardInstaller.exe from my browser
  3. Set the install location to D:\Lumberyard (my C:\ drive is almost full so I had to use a different one)
  4. Clicked "Install"
  5. REMOVEDUPLOAD I selected "Launch Lumberyard Setup Assistant"
  6. REMOVEDUPLOAD I selected "Launch"
  7. The Editor launched with no errors, and the Asset Processor is running in the background, also with no errors

Can you let me know if any of the steps you followed were different from what I have described here? I need more details about the actions you performed in order to understand what might be wrong.

answered 4 years ago
0

Hi @REDACTEDUSER I removed, downloaded the engine and downloaded it 4 times, repeated all the steps like yours and when loading the engine give that error ... Very strange. it never happened to me before. Thanks for support

answered 4 years ago
0

@REDACTEDUSER

answered 4 years ago
0

@REDACTEDUSER

answered 4 years ago
0

Okay, I will do the verification and testing and return you! Thank you!

answered 4 years ago
0

@REDACTEDUSER REMOVEDUPLOAD and

REMOVEDUPLOAD

answered 4 years ago
0

I'm not sure what you mean by this. Does the file listed in that error popup ("Gem.ImageProcessing.Editor...") exist in the folder listed in the error popup?

answered 4 years ago
0

The file is in the indicated folder and the .dll file is also there! I will remove and try the whole process again. Tomorrow I have a Webinar with more than 50 LATAM devs and I need to get the engine running. Thanks for listening.

answered 4 years ago
0

Before you completely uninstall the engine, can you check to see if you might have some sort of Windows Firewall running? Could it be blocking the Lumberyard Asset Processor from accessing .dll files?

answered 4 years ago
0

I looked yes and the firewall and antiviruses I disabled all but it didn't work.

answered 4 years ago
0

Do you have Visual Studio 2019 installed on this machine?

answered 4 years ago
0

Yes, I have, I also removed it and installed it with the engine package and even so I was not successful.

answered 4 years ago
0

só trocar a pasta nesse caso ai Juliano, é um erro tosco da amazon, tenta abrir o editor da pasta Bin64vc141, acabei de instalar e estava com esse erro também, mas resolvi assim :D

answered 4 years ago
0

just change the folder in that case, Juliano, it's a crude error from amazon, try to open the Bin64vc141 folder editor, I just installed it and I had this error too, but I solved this way

answered 4 years ago
0

Oi @REDACTEDUSER

answered 4 years ago
0

REMOVEDUPLOAD

answered 4 years ago
0

I also ran into this issue, but was able to resolve it by building the project using: lmbr_waf build_win_x64_vs2019_profile -p game_and_engine

If you use vs2017 in the command as the Lumberyards docs say to do, then it build into the Bin64vc141 folder instead of the Bin64vc142 folder.

answered 4 years ago
0

Every time I have issues with Lumberyard installs turns out to be my anti virus software and not Lumberyard itself.. When that happens, I disable the anti virus while installation and first run. Also, I whitelist the Lumberyard folder.

answered 4 years ago

This post is closed: Adding new answers, comments, and votes is disabled.