Skip to content

Not light being received from AWS Direct Connect cross connect panel

0

Hi, We've ordered two additional Direct Connects into our network. One has been delivered fine and came up straightaway. The other has been reported as no light from the AWS cross connect panel by the data centre engineers at Equinix. There is no issue with the cross connect, the specific problem is that no light is seen from the panel details given by AWS on the LOA. Regards, Jon

asked 2 years ago270 views

1 Answer
0

This issue suggests a potential problem at the physical layer (Layer 1) of your AWS Direct Connect connection. When no light is received from the AWS cross connect panel, it typically indicates a physical connectivity issue. Here are some steps you can take to troubleshoot and resolve this problem:

  1. Double-check the LOA-CFA (Letter of Authorization and Connecting Facility Assignment) details provided by AWS. Ensure that the port information, including the patch panel and port number, matches what the data center engineers are using.

  2. Verify with Equinix that the cross connect has been completed correctly on their end. Ask them to provide a cross connect completion notice and compare the ports listed with those on your LOA-CFA.

  3. Confirm that the correct type of optical transceiver is being used for the connection. The specifications should match those required by AWS Direct Connect.

  4. If possible, have the data center engineers test the optical signal strength on the cable coming from the AWS cross connect panel. This can help determine if there's a problem with the fiber itself.

  5. Ensure that the AWS Direct Connect device port is activated. Sometimes, ports may not be enabled immediately after provisioning.

  6. If all the above steps have been verified and the issue persists, it's advisable to contact AWS Support. They can check the status of the Direct Connect port on their end and potentially identify any issues on the AWS side of the connection.

Remember that for connections with port speeds higher than 1 Gbps, auto-negotiation for the port must typically be disabled. For 1 Gbps connections, the requirement may vary depending on the specific AWS Direct Connect endpoint.

If the problem continues after these checks, AWS Support should be able to assist further in diagnosing and resolving the issue, as they can directly investigate the status of the Direct Connect port on their infrastructure.

Sources
Troubleshooting AWS Direct Connect - AWS Direct Connect
AWS Direct Connect - Amazon Virtual Private Cloud Connectivity Options

answered 2 years ago

EXPERT

reviewed 2 years ago

  • The Equinix engineer has confirmed there is no light from AWS's patch panel. How do I raise this fault with AWS without having to become a subscriber to "Technical Support". This seems unjustified as the fault is with AWS.

You are not logged in. Log in to post an answer.

A good answer clearly answers the question and provides constructive feedback and encourages professional growth in the question asker.